Landmark Gateway Release Notes
------------------------------------------

Version 2.1.5		19-Oct-2023
================================

Known issues
============
  !!!IMPORTANT!!!
- For Sports installations using ArtNet you may find issues in fixture scanning performance. Workaround - Contact your Signify system expert if this is the case. A patch is available and will be rolled into the next release.
- Daily recurring events may run 1 day longer than specified. Workaround - manually delete the last occurence of the event

Improvements
============
- Remote firmware upgrade option, avoiding firmware upload issues by having gateway download from cloud directly
- Introduced option to reconfigure name and IP address of power/data supplies that support it (Monitor app)
- Authentication support for Pharos APIv6
- Fixed | Major improvements to reconnections after connectivity disruptions
- Fixed | Improved tunnel stability for stable cloud-based remote access to local webpage
- Fixed | Improved detection of Pharos LPC and TPC availability
- Fixed | Controller discovery no longer goes via WAN and will only detect on the lighting network

Remote firmware upgrade instructions
================================
- The remote firmware upgrade is meant if there are issues with the firmware installation process failing or connection being disrupted while accessing the gateway page from cloud
- A special firmware upgrade file marked '-remote' at the end of the file is made available, to use it follow these steps:
	1. Access the local webpage of the gateway via Interact Landmark
	2. Go to 'Settings' -> 'Firmware' and click 'Upload'
	3. Upload the gateway firmware marked '-remote'
		NOTE - in case the gateway has been powered for a long time, it may report 'firmware file upload failed'. If that is the case first a reboot of the gateway is required ('Settings' -> 'General' -> 'Reboot now')
	4. Wait for the installation to complete and click 'Reboot' once complete. There is a high chance your connection will be disrupted before you are presented the reboot option. If that is case wait for at least 30 minutes and return to the local webpage of the gateway via Interact Landmark and observe under 'Settings', 'Firmware' in the 'Current firmware' section if the version you uploaded is listed. If not check in the list under 'Update firmware' if the version is available and click 'Set active'.
	6. If the version under 'Current firmware' is correct, reboot the gateway to finish the gateway upgrade process ('Settings' -> 'General' -> 'Reboot now')
		If version does not match, retry the process.



Version 2.1.4		05-May-2023
================================
- Added support for ArtNet/DyNet protocols for Interact Sports (SHP) installations. Consult documentation to understand how to enable.
- BETA ONLY | Added limited connectivity mode for Interact Sports (SHP). Consult Signify staff on how to use.
- Fixed | No scan result coming if none of the power/data supplies are responding.
- Fixed | Scan results in cloud are not the same as on the local device.
- Fixed | Not able to login to gateway after changing IP address until performing a reboot.
- Fixed | Read/ping/discover of controller does not update status of device.
- Fixed | Not able to download log file after long run time of gateway.


Version 2019.08.63.332	31-March-2022
================================
- Connectivity robustness improvements, avoiding disconnects due to brief or longer connection interrupts.


Version 2019.08.54.322	15-December-2021
================================
- First official release of Landmark Gateway firmware