QuickPlay Pro 2 Release Notes
Release 2.1.0 (January 1, 2023)
New Device Support:
- Burst Powercore gen3
- ColorBlast Powercore gen5
- Graze Compact Powercore gen2
- ReachElite HP gen2
- eW Graze MX Powercore gen2
- Vaya Linear MP G3
- BurstScape Powercore
New:
- Added support for Channel Scale Factor in Settings
- Broadcast Mode can be set to Limited or Directed
- Located in Main Menu: Network -> Broadcast Mode
- Defaults to Directed Mode
- Mode selection is retained between sessions
- SmartJack Pro support
Fixed:
- Firmware update for CM400/PDS400
- Firmware version of fixtures is saved to map file
- Read-only text fields on Settings page are copyable (Serial number, Firmware version and MAC)
- All user configurable settings for Vaya Linear LP 4Ch are shown
- When an offline map is loaded, previously loaded offline devices are cleared
Release 2.0.6 (January 31, 2022)
New Device Support:
- Added Support for CM-150 CA Gen 2
- Added Support for Vaya Flood 4 Ch Families - HP, LP and MP
Firmware Update:
- Added Support for TFTP Firmware Update used on DE Pro (Powercore Families), CM-400, PDS-400 (Accent
Compact Families)
Release 2.0.5 (June 30, 2021)
New:
- Added support for Vaya Linear MP 4-Ch fixture
- Added support for expanded fixture serial number ranges for Vaya 4Ch family
- Added support for CM-550 48V CA4 and PDS-400 48V CA4
Fixed:
- ReachElite HO firmware update
Release 2.0.4 (Dec 15, 2020)
New:
- Search, Sort and Filter
- Search for Devices using Name, Serial Number or IP Address
- Sort Devices on Name, IP Address, Serial Number or DMX Address
- Filter for Devices on Device Type or Firmware Version.
- Import / Export
- Commissioning Data can be exported to a Map File.
- Map File can be imported into QPP2 to complement Offline Mode.
- Map Files are compatible with LSC.
- Offline Mode
- Add Ethernet Devices
- Add Fixtures
- Save created site topology / commissioning data to a Map File.
- Device Scans
- Can initiate multiple scans in parallel.
- Automatically pause/resume scans that cause collisions.
- Can Pause / Resume / Cancel Scans taking longer timer to complete.
- Firmware Update
- Can update firmware of Graze, Burst, Blast, ReachElite, FlexElite, PureStyle, SkyRibbon Fixtures. Vaya 4
Channel Family.
- Can update firmware of PDS 400 CA4.
- Device Addressing
- Can highlight by selecting / clicking desired fixture in Device Tree.
- USB Support
- Can configure USB Devices like iPlayer 3, iColorPlayer and Smart Jack Pro.
- Can configure Fixtures connected to USB Devices.
- Activity Monitor
- Status of current network activity is presented to the user in a section on the UI below Device Tree.
- Ability to Pause / Resume / Cancel any currently running network activity.
- UI/UX Workflow Improvements
- CK Brand Guidelines are implemented for all UI Components
- Consistent Color Schemes are used across application
- Consistent Font is used across application
Fixed:
- RDM Configuration reliability issues are fixed.
- Several UI Issues are addressed through updated UI/UX Workflow Improvements.
- Serial Numbers for Chromasic Nodes are calculated and presented using a predetermined format -
<SerialNumber
of PDS>.<PortNumber of PDS>.<Count of Node>
Release 2.0.3 (April 29, 2020)
New:
- RDM queries are now retried up to 5 times in the event of an invalid response.
- Mac release is now notarized for use on OSX Catalina.
- Discovery and read of devices is now done in parallel
- Added support for Archipoint RGBW
Fixed:
- Uninstall now cleans up firewall entries related to the installation
- Firmware version and MAC address are now displayed for Ethernet devices
- Exit button is now the last item in the File menu
- RDM Identify is now cleared when fixtures are deselected
- Improved UI scaling on high-DPI screens
Changed:
- Firmware variant is no longer checked as part of the firmware update process.
Removed:
- No functionality was removed as part of this release.
Known Defects:
- No new known defects were introduced in this release
Release 2.0.2 (Sept 25, 2019)
Bug
- [QPP2-416] - Wrong string in Shortcut name during installation
- [QPP2-424] - Channel stride in "Address Fixtures" doesn't match current fixture footprint
- [QPP2-425] - Red channel not output reliably for FlexElite systems with RGBA nodes
Epic
- [QPP2-435] - Implement CKDMX firmware update via CLI and support .UU files
Story
- [QPP2-400] - QPP2 Maintenance Release 2.0.2
- [QPP2-405] - Add support for Vaya Linear 4 channel
- [QPP2-406] - Add support for Graze Compact
- [QPP2-407] - Add support for PureStyle Compact
- [QPP2-426] - Secure FW update - first pass
- [QPP2-429] - Add support for RDM ACK_TIMER response
- [QPP2-433] - Work around MPC8 packet truncation on ACK_TIMER packets
- [QPP2-434] - Support UU files in Firmware Update
- [QPP2-436] - Create state machine for CKDMX firmware update
- [QPP2-437] - Import .UU file and parse header
- [QPP2-438] - CLI interface for CKDMX updates
- [QPP2-439] - Generate KiNET data for CKDMX updates
- [QPP2-440] - Support multi-fixture CKDMX updates
- [QPP2-441] - Verify FW update was successful
- [QPP2-444] - Add support for iHue Downlight
Release 2.0.1 (March 25, 2019)
Features:
- Support for FlexElite iW, Vaya Flood LP 10W
Additional Notes:
- New icon and splash screen
Release 2.0.0 (November 09, 2018)
Features:
- Configuration of all CK fixtures and power/data supplies in production as of Q4 2018
- Basic channel testing functionality
- Basic effects (fixed color, color wash, sweep, streak) with multi-channel color picker
- Map-based preview of content being sent to fixtures
Known Limitations:
- No support for USB devices (iPlayer 3, SmartJack Pro, iColor Player). Workaround: use QuickPlay Pro 1.x
- Limited support for legacy fixtures. Workaround: use QuickPlay Pro 1.x
- Limited support for configuration of Antumbra iColor Keypad. Workaround: use Antumbra iColor Keypad Effect
Manager
- No option for changing brightness of effects. Workaround: adjust colors used in effects