# QuickPlay Pro 2 Release Notes

## Release 2.1.3 (April 2025)

### New:

- Added support for RGB-only mode for Accent Compact
- Added sACN property support for Data Enabler Pro gen3 (requires sACN-compatible firmware on Data Enabler Pro gen3)
- Added option to filter to only configurable devices

### Fixed:

- GrazeElite fixtures are now handled as multi-pixel devices
- Updated supported properties for KiNET devices
- Resolved several issues related to device firmware update
- Resolved a number of minor issues related to the user interface

### Known Limitations:

- Multi-device firmware update for the following devices may be unreliable and updating a single device at a time is recommended

- Data Enabler Pro gen3 running firmware versions older than A58B15

- QuickPlay Pro 2 may indicate that a firmware update has failed, even though the firmware update completed successfully. Re-discovering devices after a firmware update will display the correct status.
- On macOS, the uninstaller does not function as expected. As a workaround, QuickPlay Pro 2 can be uninstalled by deleting the installation folder.
- On Windows 11, Quickplay Pro 2 cannot be uninstalled from the Settings app. As a workaround, QuickPlay Pro 2 can be uninstalled from the Control Panel or via the uninstaller in the installation folder.
- On macOS Sequoia, device discovery may require a system reboot in order to function properly.

## Release 2.1.2 (September 2024)

### New Device Support:

- Luminous Textile gen2
- ReachElite HO gen2
- ReachElite HP gen3
- Data Enabler Pro gen3
- GrazeElite

### New:

- Added support for Channel Scale Factor in Settings for Accent family
- Added additional configuration options to PDS-400 CA4 and CM-550 CA4

### Fixed:

- Resolved several issues related to the installer
- Resolved several issues related to device discovery and scan
- Resolved a number of minor issues related to the user interface
- Resolved a number of minor issues related to the color picker

### Changed:

- Splash screen now includes Signify branding
- Settings page header now displays device type instead of device name

### Known Limitations:

- GrazeElite fixtures currently operate as a single pixel for effects in QuickPlay Pro 2

## Release 2.1.0 (January 1, 2023)

### New Device Support:

- Burst Powercore gen3
- ColorBlast Powercore gen5
- Graze Compact Powercore gen2
- ReachElite HP gen2
- eW Graze MX Powercore gen2
- Vaya Linear MP G3
- BurstScape Powercore

### New:

- Added support for Channel Scale Factor in Settings
- Broadcast Mode can be set to Limited or Directed

- Located in Main Menu: Network -> Broadcast Mode
- Defaults to Directed Mode
- Mode selection is retained between sessions

- SmartJack Pro support

### Fixed:

- Firmware update for CM400/PDS400
- Firmware version of fixtures is saved to map file
- Read-only text fields on Settings page are copyable (Serial number, Firmware version and MAC)
- All user configurable settings for Vaya Linear LP 4Ch are shown
- When an offline map is loaded, previously loaded offline devices are cleared

## Release 2.0.6 (January 31, 2022)

### New Device Support:

- Added Support for CM-150 CA Gen 2
- Added Support for Vaya Flood 4 Ch Families - HP, LP and MP

### Firmware Update:

- Added Support for TFTP Firmware Update used on DE Pro (Powercore Families), CM-400, PDS-400 (Accent Compact Families)

## Release 2.0.5 (June 30, 2021)

### New:

- Added support for Vaya Linear MP 4-Ch fixture
- Added support for expanded fixture serial number ranges for Vaya 4Ch family
- Added support for CM-550 48V CA4 and PDS-400 48V CA4

### Fixed:

- ReachElite HO firmware update

## Release 2.0.4 (Dec 15, 2020)

### New:

- Search, Sort and Filter

- Search for Devices using Name, Serial Number or IP Address
- Sort Devices on Name, IP Address, Serial Number or DMX Address
- Filter for Devices on Device Type or Firmware Version.

- Import / Export

- Commissioning Data can be exported to a Map File.
- Map File can be imported into QPP2 to complement Offline Mode.
- Map Files are compatible with LSC.

- Offline Mode

- Add Ethernet Devices
- Add Fixtures
- Save created site topology / commissioning data to a Map File.

- Device Scans

- Can initiate multiple scans in parallel.
- Automatically pause/resume scans that cause collisions.
- Can Pause / Resume / Cancel Scans taking longer timer to complete.

- Firmware Update

- Can update firmware of Graze, Burst, Blast, ReachElite, FlexElite, PureStyle, SkyRibbon Fixtures. Vaya 4 Channel Family.
- Can update firmware of PDS 400 CA4.

- Device Addressing

- Can highlight by selecting / clicking desired fixture in Device Tree.

- USB Support

- Can configure USB Devices like iPlayer 3, iColorPlayer and Smart Jack Pro.
- Can configure Fixtures connected to USB Devices.

- Activity Monitor

- Status of current network activity is presented to the user in a section on the UI below Device Tree.
- Ability to Pause / Resume / Cancel any currently running network activity.

- UI/UX Workflow Improvements

- CK Brand Guidelines are implemented for all UI Components
- Consistent Color Schemes are used across application
- Consistent Font is used across application

### Fixed:

- RDM Configuration reliability issues are fixed.
- Several UI Issues are addressed through updated UI/UX Workflow Improvements.
- Serial Numbers for Chromasic Nodes are calculated and presented using a predetermined format - <SerialNumber of PDS>.<PortNumber of PDS>.<Count of Node>

## Release 2.0.3 (April 29, 2020)

### New:

- RDM queries are now retried up to 5 times in the event of an invalid response.
- Mac release is now notarized for use on OSX Catalina.
- Discovery and read of devices is now done in parallel
- Added support for Archipoint RGBW

### Fixed:

- Uninstall now cleans up firewall entries related to the installation
- Firmware version and MAC address are now displayed for Ethernet devices
- Exit button is now the last item in the File menu
- RDM Identify is now cleared when fixtures are deselected
- Improved UI scaling on high-DPI screens

### Changed:

- Firmware variant is no longer checked as part of the firmware update process.

### Removed:

- No functionality was removed as part of this release.

### Known Defects:

- No new known defects were introduced in this release

## Release 2.0.2 (Sept 25, 2019)

### New Device Support:

- Vaya Linear 4 channel
- PureStyle Compact Powercore
- Graze Compact Powercore
- Calculite Downlight with IntelliHue Technology

### New:

- Added support for device firmware update

### Resolved Defects:

- Resolved a number of minor defects

## Release 2.0.1 (March 25, 2019)

### Features:

- Support for FlexElite iW, Vaya Flood LP 10W

### Additional Notes:

- New icon and splash screen

## Release 2.0.0 (November 09, 2018)

### Features:

- Configuration of all CK fixtures and power/data supplies in production as of Q4 2018
- Basic channel testing functionality
- Basic effects (fixed color, color wash, sweep, streak) with multi-channel color picker
- Map-based preview of content being sent to fixtures

### Known Limitations:

- No support for USB devices (iPlayer 3, SmartJack Pro, iColor Player). Workaround: use QuickPlay Pro 1.x
- Limited support for legacy fixtures. Workaround: use QuickPlay Pro 1.x
- Limited support for configuration of Antumbra iColor Keypad. Workaround: use Antumbra iColor Keypad Effect Manager
- No option for changing brightness of effects. Workaround: adjust colors used in effects